(805) 486-8307 Hours: 9:00 am-6:00 pm PST M-Sat; Sunday 10 am-3 pm

MRV-V500

$0.00

Born Tough, Raised Strong

Tens of thousands have relied on V-Power amplifiers for dependable, quality power. Now in their fourth generation, V-Power amplifiers carry on this heritage and prove that playing strong never looked or sounded better. Yes, it is possible to improve upon a good thing.

Compare
SKU: 165 Categories: , Tag:

Description

Overview

  • 60W x 4 + 250W x1 RMS (2?, 14V, ?1% THD+N)
  • 40W x 4 + 150W x1 RMS (4?, 14.4V, ?1% THD+N)
  • Same power in a 40% smaller chassis
  • Evolution to Class D digital platform
  • New snap-on terminal covers for easy installation

Raising the Bar

The new V-Power products are now Class D digital amplifiers, resulting in a huge efficiency gain versus their predecessors without draining your battery or your pockets. Class-D provides continuous clean power to your speakers, operating at 80% efficiency far greater than conventional Class A or B amplifiers. Translation: Enjoy cleaner bass, even during extreme power demands.

Big Power, Small Package

V-Power amplifiers are known for their compact size, but don

Additional information

SPECS

Features and Specification
SPECIFICATIONS

CEA-2006 Power Ratings
CEA-2006 Power Rating: 40W x 4 + 150 x 1 RMS (4-ohm, 14.4V at <1% THD+N)
RMS Power Ratings
Per channel into 4 Ohms: 40W x 4 + 150 x 1 RMS(14.4V at <1% THD+N)
Per channel into 2 Ohms: 60W x 4 + 1 x 250 RMS (14.4V at <1% THD+N)
Sound Tuning
Crossover Frequency (CH1/2/3/4, LPF): 50 – 400 Hz, -24dB/oct.
Crossover Frequency (CH1/2/3/4, HPF): 50 – 400 Hz, -24dB/oct.
Crossover Frequency (Subwoofer, LPF): 50 – 400 Hz, -24dB/oct.
EQ (Equalizer): 0 to +12dB, fc=50Hz
Dimensions
Foot Print (WxHxD) mm: 200 x 55 x 200 mm
Foot Print (WxHxD) in: 9-3/4'' x 2-1/4'' x 8-5/8''
Heat Sink (WxHxD) mm: 244.5 x 55 x 219 mm
General
Power Requirements: 14.4 V.DC (11-16V allowable)
Input Sensitivity (RCA Input): 0.2 – 4.0 V
Input Sensitivity (Speaker Level Input): 0.5 – 10 V
Input Impedance: >10k ohms
THD+N (Rated Power into 4 Ohms) for Subwoofer:
THD+N (10W into 4 Ohms): ≤0.02 %
THD+N (10W into 2 Ohms): ≤0.03 %
THD+N (Rated Power into 4 Ohms): ≤0.07 %
THD+N (Rated Power into 2 Ohms): ≤0.09 %
Damping Factor (10W into 4 Ohms at 100Hz): >90 (Ch 1-4), >500 (Subwoofer)
Signal to Noise (1W into 4 Ohms): >81 dB
Signal to Noise (Rated Power into 4 Ohms): >98 dB
Remote Level: -20 to 0 dB
FEATURES

Install
Terminal Layout: Two-Sided
Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals
General
Amplifier Type: Class-D (Digital)
Channel Design: 5 Channel
Power Supply Design: DC-DC PWM Power Supply
Pre-Amp Stage: Discrete
Final Outputs: Power MOSFET
Crossover: Variable Lowpass & Highpass Filter
Gain Control: Continuously Adjustable Gain Control
Bass EQ: Bass EQ Function
Remote Turn On: Remote Sensing Function (for RCA Input & Speaker Input)
Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection
Board Circuitry: S.T.A.R. Circuit
Speaker-Level Inputs: 4-channel Speaker Level Inputs
Power Indicator: Top Mounted Blue LED Power Indicator
Thermal Control: Multi-stage Power Limits
Power Supply: MOSFET
Documents
Owner's Manual, Owner's Manual (English)
Owner's Manual, Owner's Manual (Espanol)
Owner's Manual, Owner's Manual (French)

Reviews

There are no reviews yet.

Be the first to review “MRV-V500”

Your email address will not be published. Required fields are marked *