(805) 486-8307 Hours: 9:00 am-6:00 pm PST M-Sat; Sunday 10 am-3 pm

blank[cart_button]

P1000X1bd

$599.99

P1000X1bd

Punch 1,000 Watt Class-bd Mono Amplifier

The Punch P1000X1bd mono amplifier pumps out 1,000 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response is optimized for subwoofers.

Compare
SKU: 201 Categories: , Tag:

Description

P1000X1bd

With its super efficient Class-BD circuit topology, the P1000X1bd assures maximum BOOM for your buck! Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers with ease.

Additional information

specs

CEA-2006 Compliant: CEA-2006 Guidelines CEA-2006 Power Rating
300W x 1 @ 4Ω
≤1.0% THD+N
Number of Channels: 1
Rated Power
(RMS Continuous Power): 300 Watts x 1 @ 4-Ohm
500 Watts x 1 @ 2-Ohm
1000 Watts x 1 @ 1-Ohm
Total Power
(Sum of Rated Power): 1000 Watts
Dynamic Power
(PVC/PowerCube®): 491 Watts x 1 @ 4-Ohms
874 Watts x 1 @ 2-Ohms
1,430 Watts x 1 @ 1-Ohm
Bridgeable: No
Frequency Response: 20Hz to 250Hz +/- 1.0dB
Efficiency (average): 86% @ 4-Ohm
Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0%
2-Ohm: <1.0%
1-Ohm: <1.0%
Crossover Controls: Low-Pass (LP): 50-250Hz @ 12dB/octave Butterworth
Infrasonic Filter (IF): 28Hz @ 12dB/Octave Butterworth
All-Pass: No
Tone Controls: Punch EQ2 Bass: 0dB to +18dB @ 45Hz
Input Sensitivity: 150 mV – 12 V
Signal Input: Hi/Low level: 1 RCA pair
Signal Output: Hi/Low level: 1 RCA pair
Power Input Connector: Captive C-Clamp
Power Wire Gauge: 4 AWG
Speaker Output Connector: Captive C-Clamp
Speaker Wire Gauge: 8 AWG to 18 AWG
Heat Sink Type: Cast aluminum
Cooling: Convection
Remote Controls: Optional Punch Level Control (PLC2) Ready
Visual Indicators: Power/Protect/Thermal LED
Input Clip LED
Output Clip LED
Circuit Topology Class: Class-BD
Operating Voltage: 9 – 16 VDC
Recommended Fuse
(not included): 140 A
Max. Current Draw (13.8V Sinewave): 130 A
Average Current Draw (13.8V Music): 65 A
Suggested Alternator: 100 A
Shipping Weight: 12.9 Lbs. (5.85 Kg.)
Dimensions (H x W x D): 2.38 x 7.76 x 13.28 (in)
6.05 x 19.71 x 33.73 (cm)CEA-2006 Compliant: CEA-2006 Guidelines CEA-2006 Power Rating
300W x 1 @ 4Ω
≤1.0% THD+N
Number of Channels: 1
Rated Power
(RMS Continuous Power): 300 Watts x 1 @ 4-Ohm
500 Watts x 1 @ 2-Ohm
1000 Watts x 1 @ 1-Ohm
Total Power
(Sum of Rated Power): 1000 Watts
Dynamic Power
(PVC/PowerCube®): 491 Watts x 1 @ 4-Ohms
874 Watts x 1 @ 2-Ohms
1,430 Watts x 1 @ 1-Ohm
Bridgeable: No
Frequency Response: 20Hz to 250Hz +/- 1.0dB
Efficiency (average): 86% @ 4-Ohm
Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0%
2-Ohm: <1.0%
1-Ohm: <1.0%
Crossover Controls: Low-Pass (LP): 50-250Hz @ 12dB/octave Butterworth
Infrasonic Filter (IF): 28Hz @ 12dB/Octave Butterworth
All-Pass: No
Tone Controls: Punch EQ2 Bass: 0dB to +18dB @ 45Hz
Input Sensitivity: 150 mV – 12 V
Signal Input: Hi/Low level: 1 RCA pair
Signal Output: Hi/Low level: 1 RCA pair
Power Input Connector: Captive C-Clamp
Power Wire Gauge: 4 AWG
Speaker Output Connector: Captive C-Clamp
Speaker Wire Gauge: 8 AWG to 18 AWG
Heat Sink Type: Cast aluminum
Cooling: Convection
Remote Controls: Optional Punch Level Control (PLC2) Ready
Visual Indicators: Power/Protect/Thermal LED
Input Clip LED
Output Clip LED
Circuit Topology Class: Class-BD
Operating Voltage: 9 – 16 VDC
Recommended Fuse
(not included): 140 A
Max. Current Draw (13.8V Sinewave): 130 A
Average Current Draw (13.8V Music): 65 A
Suggested Alternator: 100 A
Shipping Weight: 12.9 Lbs. (5.85 Kg.)
Dimensions (H x W x D): 2.38 x 7.76 x 13.28 (in)
6.05 x 19.71 x 33.73 (cm)

Reviews

There are no reviews yet.

Be the first to review “P1000X1bd”

Your email address will not be published. Required fields are marked *